This product is a one-component water-based high-elastic waterproof coating. It uses styrene-butadiene-styrene (SBS) copolymerized thermoplastic elastomer as modifier, high-quality petroleum asphalt modified, and added a variety of rubber, synthetic resin, surfactant, emulsifier, anti-mold agent.
Liquid To Powder Ratio：
Scope Of Application：
Suitable for waterproof and moisture-proof treatment of:
1. Building facades of various concrete masonry structures.
2. Walls in basements, wine kiln, air-raid shelters and garages.
3. Roofing, basement, garage, floor, kitchen and bathroom waterproofing and bridge tunnel construction.
1. One-component product, no need to be deployed on site, easy to use.
2. Water-based paint, no toxic substances such as coal tar, anti-burning, environmental protection.
3. Excellent mechanical properties, high elasticity, strong adhesion and aging resistance. It is more suitable for waterproofing treatment of cracked and deformed parts of the base structure, no falling off or peeling after proper construction.
4. Strong self-healing ability and can repair the pierced holes by itself.
It has strong waterproof and anti-ultraviolet effect, can be used at -50-88 ° C，life expectancy of up to 20 years, has good elasticity at low temperature， which is the best choice for building roof waterproofing engineering.
5. Easy to construct and convenient post-maintenance.
6. Low overall cost and high cost performance, which is the best alternatives to traditional products.
1. Cleaning: Clean up the dust, repair the cracks, use the plugging agent and Polyester cloth to make the arc treatment at the root of the tube and the internal and external corners, moisten the base surface with clean water. Make sure the base surface is flat, solid, clean, free of oil and water.
2. Mixing: Pour the liquid into the container first, then pour the powder into the container while stirring, until there is no powder. Place it for 3-5 minutes and stir it again
3. Brushing: The direction of the brush is 90 degrees with the previous time, the second time after 2-4 hours, and the third time after 4-8 hours.
4. Maintenance: After 24 hours, water spray maintenance lasts for 2-3 days.
5. Protection: It is forbidden to step on, rain, exposure, sharp damage.
6. Closed water test: After the film is completely dried (estimated 3-5 days), block the sewer for water storage, the water storage depth should be no less than 20mm, keep for 24 hours, no significant drop in water surface is qualified.
Single coating surface layer : 0.7-1.5kg/m²
Store in a cool and dry place (5-35 ° C), unopened for 12 months
1. This product is suitable for use at temperatures between 5 ° C and 40 ° C. Avoid construction in wet and rainy weather.
2. If there are many rough sand holes on the base surface, it is recommended to use Dobons K11 waterproof coating or the plugging agent to carry out the foundation treatment.
3. Roofing waterproof layer and special position reinforcement, it is recommended to have a built-in polyester cloth for better effect. The waterproof coating should be applied in multiple passes, and the thickness of each application should not exceed 1mm.
4. Wear protective gloves and goggles when touching the product. If the product is in contact with your eyes and skin, rinse it thoroughly with clean water. If you still feel unwell, seek medical attention immediately.
Next:DBS107 Tile Toughened Film