This product is a two-component waterproof coating that combines liquid and powder in a certain proportion using German technology. The liquid material is composed of a polymer chemical raw material and a multifunctional polymer interface modifier. Powder is made of cement and graded sand. It is a new environmentally friendly product with high permeability and high bond strength.
Film color: grey
Liquid color: white
Powder color: grey
Liquid To Powder Ratio：
Scope Of Application：
1. It is suitable for foundation surface transformation that can't be directly constructed.
2. Old tile surface renovation.
3. Pretreatment of high density, low water absorption tile.
1. Superior adhesion, suitable for any tile and stone.
2. Anti-seepage, safe and reliable, good impact resistance, no falling off, safe and secure.
3. Low overall cost.
4. Environmentally friendly, non-toxic, free of formaldehyde.
1. Clean the back of the tile and the dust on the wall.
2. Mixing: Pour the liquid into the container first, then pour the powder into the container while stirring, until there is no powder. Place it for 3-5 minutes and stir it again.
3. Apply the glue evenly to the pretreated base or the back of the tile
4. After the film is formed, the cement slurry can be wiped.
Single coating surface layer : 0.5kg/m²
Store in a cool and dry place (5-35 ° C), unopened for 12 months
1. This product is suitable for use at temperatures between 5 ° C and 40 ° C. Avoid construction in wet and rainy weather.
2. Plastering after the cement is condensed.
3. Use the mixture well within 2 hours, it is not allowed the condensed material to continue to add water.
4. Any base surface must be pre-tested for small area before large-area construction.
5. This product contains preservatives, please avoid direct contact with the skin, wear protective gloves and goggles when touching the product. If you come into contact with your eyes and skin, rinse immediately with water and still feel unwell, seek medical attention immediately.