- Product Manual
- Related Download
- View other products
This product is a two-component waterproof coating that combines liquid and powder in a certain proportion using German technology. The liquid material is composed of imported emulsion and auxiliary materials. The powder is composed of imported polymer chemical raw materials and special cement, graded sand and special mineral powder. After the two materials are mixed, a chemical reaction occurs, which not only forms a surface coating waterproof, but also penetrates into the inside of the substrate to form a crystal repressing water to achieve a double waterproof effect.
Film color: green
Liquid color: milky
Powder color: green
Liquid To Powder Ratio：
Scope Of Application：
1. Suitable for waterproof, anti-seepage and moisture-proof projects of various buildings.
2. Especially suitable for indoor and outdoor waterproof projects such as kitchens, bathrooms, pools, and exterior walls.
1. High adhesion of coating and substrate, can be used in long-term water immersion environment.
2. Good flexibility which can resist slight shock and displacement of the base layer.
3. Anti-mold and moisture-proof, excellent acid and alkali resistance, firm bonding, easy to brush, environmentally friendly and non-toxic.
4. Color upgrade ensures all parts are brushed, waterproof effect is more assured.
1. Cleaning: Clean up the dust, repair the cracks, use the plugging agent to make the arc treatment at the root of the tube and the internal and external corners, moisten the base surface with clean water. Make sure the base surface is flat, solid, clean, free of oil and water.
2. Mixing: Pour the liquid into the container first, then pour the powder into the container while stirring, until there is no powder. Place it for 3-5 minutes and stir it again
3. Brushing: The direction of the brush is 90 degrees with the previous time, the second time after 2-4 hours, and the third time after 4-8 hours.
4. Maintenance: After 24 hours, water spray maintenance lasts for 2-3 days.
5. Protection: It is forbidden to step on, rain, exposure, sharp damage.
6. Closed water test: After the film is completely dried (estimated 3-5 days), block the sewer for water storage, the water storage depth should be no less than 20mm, keep for 24 hours, no significant drop in water surface is qualified.
Single coating surface layer : 2.0kg/m²
Store in a cool and dry place (5-35 ° C), unopened for 12 months
1. This product is suitable for use at temperatures between 5 ° C and 40 ° C. Avoid construction in wet and rainy weather.
2. Use the mixture well within 1 hour, it is not allowed the condensed material to continue to add water.
3. Single layer painting should not be too thick, especially at the nozzle and corner, to prevent cracks.
4. Keep the ventilation environment after construction, easy to dry the waterproof layer.
5. Please avoid damage to the waterproof layer during construction.
6. It is forbidden to use pure cement paste when laying tiles on the waterproof layer, and please apply according to the requirements of tile use and leave a gap. Highly recommended to use Dobons strong tile adhesive.
7. This product contains cement and may cause skin irritation. Wear protective gloves and goggles when touching the product. If the product is in contact with your eyes and skin, rinse it thoroughly with clean water. If you still feel unwell, seek medical attention immediately.