sales@whdobons.com

+86 13635265968

产品banner
Your current position: Home >> Products >> Waterproof series

  • DBS210 K11 General Waterproof Coating

Customer Service Hotline

+86 13635265968

E-mail:sales@whdobons.com


Products  Description:

This product is a two-component waterproof coating which combines liquid material and powder in a certain proportion. The liquid material is composed of polymer emulsion and various additives. The powder is made of high quality cement, graded sand and various active chemicals. It has high bonding strength, good impermeability and acid and alkali resistance, which is special used for waterproof treatment of mortar and concrete structures.

Specifications:

6kg/barrel 

18kg/barrel

Colors:

Film color: blue

Liquid color: blue

Powder color: white 

Liquid To Powder Ratio:

1:3

Scope Of Application:

1. Kitchen, bathroom, pool.

2. Underground structure: garage, tunnel.

3. Wall and humid part.

4. Indoor and outdoor building walls and floors.

5. Especially suitable for waterproof and seepage prevention engineering of exterior wall cement base.

Feature Advantage:

1. Good impermeability.

2. Good adhesion to the base surface and high bonding strength.

3. Good water resistance, which can be used for long-term water immersion environment.

4. Directly constructed in wet area.

Construction Process:

1. Cleaning: Clean up the dust, repair the cracks, use the plugging agent to make the arc treatment at the root of the tube and the internal and external corners, moisten the base surface with clean water. Make sure the base surface is flat, solid, clean, free of oil and water.

2. Mixing: Pour the liquid into the container first, then pour the powder into the container while stirring, until there is no powder. Place it for 3-5 minutes and stir it again.

3. Brushing: The direction of the brush is 90 degrees with the previous time, the second time after 2-4 hours, and the third time after 4-8 hours.

4. Maintenance: After 24 hours, water spray maintenance lasts for 2-3 days. 

5. Protection: It is forbidden to step on, rain, exposure, sharp damage. 

6. Closed water test: After the film is completely dried (estimated 3-5 days), block the sewer for water storage, the water storage depth should be no less than 20mm, keep for 24 hours, no significant drop in water surface is qualified.

Reference Dosage:

Single coating surface layer : 1.50-2.0kg/m²

Warranty:

Store in a cool and dry place (5-35 ° C), unopened for 12 months

Precautions:

1. This product is suitable for use at temperatures between 5 ° C and 40 ° C. Avoid construction in wet and rainy weather.

2. No need to add water and don’t mix this product with other materials or additives.

3. Use the mixture well within 1 hour, it is not allowed the condensed material to continue to add water.

4. Single layer painting should not be too thick, especially at the nozzle and corner, to prevent cracks.

5. Keep the ventilation environment after construction, easy to dry the waterproof layer.

6. Please avoid damage to the waterproof layer during construction.

7. It is forbidden to use pure cement paste when laying tiles on the waterproof layer, and please apply according to the requirements of tile use and leave a gap. Highly recommended to use Dobons strong tile adhesive.

8. This product contains cement and may cause skin irritation. Wear  protective gloves and goggles when touching the product. If the product is in contact with your eyes and skin, rinse it thoroughly with clean water. If you still feel unwell, seek medical attention immediately.

Related labels:

Your viewed products

Contact: sales@whdobons.com

Phone: +86 13635265968

Address: 312, Building 13, No. 17, Gutian 5th 

Road, Qiaokou District, Wuhan, Hubei, China

Website:www.whdobons.com

Website: http://www.whdobons.com

Copyright © http://www.whdobons.com/ Wuhan Dobons Building Materials Co.,LTD Specializing inWaterproof Coating,Tile Adhesive & Grout,Plugging Agent,Welcome to inquire!
鄂ICP备17008533号  Technical Support:Website Construction