- Product Manual
- Related Download
- View other products
This product is a two-component waterproof coating that combines liquid and powder in a certain proportion using German technology. The liquid material is composed of imported acrylic emulsion and additives. The powder is composed of special cement, graded sand and special mineral powder.
Film color: grey
Liquid color: milky
Powder color: grey
Liquid To Powder Ratio：
Scope Of Application：
1. Inner and outer wall, ground of cement concrete structure or mortar masonry structure.
2. Bathroom,kitchen, floor, balcony, pool floor and wall waterproof.
3. Smear treatment before laying stone, tile, wooden floor, wallpaper, plasterboard to prevent moisture and salt pollution.
1. Double waterproof effect of coating and osmotic crystal.
2. Good breathability.
3. Good flexibility, can resist slight deformation, covering small cracks.
4. Cement-based products, strong adhesion, can directly carry out the subsequent processes of laying tiles.
5. The construction is convenient and fast, it can be constructed on the wet base surface.
6. Water-based material, non-toxic, harmless, non-polluting, which is an environmentally friendly product.
1. Cleaning: Clean up the dust, repair the cracks, use the plugging agent to make the arc treatment at the root of the tube and the internal and external corners, moisten the base surface with clean water. Make sure the base surface is flat, solid, clean, free of oil and water.
2. Mixing: Pour the liquid into the container first, then pour the powder into the container while stirring, until there is no powder. Place it for 3-5 minutes and stir it again.
3. Brushing: The direction of the brush is 90 degrees with the previous time, the second time after 2-4 hours, and the third time after 4-8 hours.
4. Maintenance: After 24 hours, water spray maintenance lasts for 2-3 days.
5. Protection: It is forbidden to step on, rain, exposure, sharp damage.
6. Closed water test: After the film is completely dried (estimated 3-5 days), block the sewer for water storage, the water storage depth should be no less than 20mm, keep for 24 hours, no significant drop in water surface is qualified.
Single coating surface layer : 2.0kg/m²
Store in a cool and dry place (5-35 ° C), unopened for 12 months
1. This product is suitable for use at temperatures between 5 ° C and 40 ° C. Avoid construction in wet and rainy weather.
2. No need to add water and don’t mix this product with other materials or additives.
3. Use the mixture well within 1 hour, it is not allowed the condensed material to continue to add water.
4. Single layer painting should not be too thick, especially at the nozzle and corner, to prevent cracks.
5. Keep the ventilation environment after construction, easy to dry the waterproof layer.
6. Please avoid damage to the waterproof layer during construction.
7. It is forbidden to use pure cement paste when laying tiles on the waterproof layer, and please apply according to the requirements of tile use and leave a gap. Highly recommended to use Dobons strong tile adhesive.
8. This product contains cement and may cause skin irritation. Wear protective gloves and goggles when touching the product. If the product is in contact with your eyes and skin, rinse it thoroughly with clean water. If you still feel unwell, seek medical attention immediately.