+86 13635265968

Your current position: Home >> Products >> Waterproof series

Customer Service Hotline

+86 13635265968

Products  Description:

It is prepared from high-elastic emulsion and various polymer additives. It can be used evenly mixed with cement according to a certain proportion during construction.





Liquid color: milky 

Liquid To Powder Ratio:


Scope Of Application:

1. Suitable for waterproof and moisture-proof treatment of roofs, interior and exterior walls, kitchen, bathroom, balcony.

2. Suitable for waterproofing and seepage prevention of buildings such as basement, swimming pool, tunnel, drinking water pool, etc.

Feature Advantage:

1. Easy to use, just mix it with cement in a certain ratio.

2. Good elasticity, flexibility, extensibility, water resistance and crack resistance, good weather resistance. 

3. Certain gas permeability, good adhesion with cement mortar leveling layer and tile glue. 

4. Applied directly on the wet base surface. 

5 Non-toxic, water-based environmentally friendly products.

Construction Process:

1. Cleaning: Clean up the dust, repair the cracks, use the plugging agent to make the arc treatment at the root of the tube and the internal and external corners, moisten the base surface with clean water. Make sure the base surface is flat, solid, clean, free of oil and water.

2. Mixing: Pour the liquid into the container first, then pour the powder into the container while stirring, until there is no powder. Place it for 3-5 minutes and stir it again.

3. Partial treatment: Before the construction of large-area waterproof layer, the root of the tube and the internal and external corners should be painted 2~3 times. It is recommended to add a layer of reinforcement material (the material should be sandwiched in the middle of the film).

4. Brushing: The direction of the brush is 90 degrees with the previous time, the second time after 2-4 hours, and the third time after 4-8 hours.

5. Maintenance: After 24 hours, water spray maintenance lasts for 2-3 days. 

6. Protection: It is forbidden to step on, rain, exposure, sharp damage. 

7. Closed water test: After the film is completely dried (estimated 3-5 days), block the sewer for water storage, the water storage depth should be no less than 20mm, keep for 24 hours, no significant drop in water surface is qualified.

Reference Dosage:

Single coating surface layer : 1.0kg/m²


Store in a cool and dry place (5-35 ° C), unopened for 12 months


1. This product is suitable for use at temperatures between 5 ° C and 40 ° C. Avoid construction in wet and rainy weather.

2. Cement standard 32.5R ordinary Portland cement (or higher than 32.5R standard cement).

3. Use the mixture well within 1 hour, it is not allowed the condensed material to continue to add water.

4. Single layer painting should not be too thick, especially at the nozzle and corner, to prevent cracks.

5. Keep the ventilation environment after construction, easy to dry the waterproof layer.

6. Please avoid damage to the waterproof layer during construction.

7. This product is alkaline. If it is accidentally splashed into the eyes, it will be irritating. Please rinse it with water in time. If you still feel unwell, seek medical attention immediately.

Related labels:

Your viewed products


Phone: +86 13635265968

Address: 312, Building 13, No. 17, Gutian 5th 

Road, Qiaokou District, Wuhan, Hubei, China


Copyright © Wuhan Dobons Building Materials Co.,LTD Specializing inWaterproof Coating,Tile Adhesive & Grout,Plugging Agent,Welcome to inquire!
鄂ICP备17008533号  Technical Support:Website Construction